7
0027364-00_BEDBWRTAQP 12/2021 •
repa
BAD GmbH • We reserve the right to make technical changes. All dimensions in cm.
08 SERVICING
09 NOZZLE FUNCTION AND STRUCTURE
Cleaning the nozzles
If required, remove the lime scale deposits on the nozzles using Repabad “Special cleaner”
(art. no. 0010276).
To enable cleaning, unscrew the nozzle inserts using the special key
(art. no. 0034796):
- To remove the inserts (1), carefully guide the metal pins of the
key (2) into the holes on the nozzle caps, and unscrew in an
anti-clockwise direction.
Do not twist or remove the nozzle body (3)!
- Screw the nozzle insert (1) back in
flush with the chrome ring.
Removing the nozzle inserts (1) does not negatively
affect the seal of the bath.
Make sure the bath is filled up to
at least 5 cm
above the nozzles before disinfection!
- Add disinfectants to the water after bathing:
A volume of approx. 80 - 500 ml, dependent on the bathtub size (concentration 1 : 1000).
- Let the disinfectant solution react for approx. 30 minutes.
- During this time, run the pump 3 times for 1 or 2 minutes.
Switch off the bath, open the bathtub drain and let the disinfectant solution drain out.
- After approx. 5 minutes, dry the nozzles and bathtub using a soft, non-abrasive
and lint-free cloth.
- Leave the bathtub drain open.
2
3
1
Servicing / nozzles
