repabad Vision 1000, Operating Instructions Manual

10 0022771-01_BEDWHPV.1 12/2021 • 

repa

BAD GmbH • We reserve the right to make technical changes. All dimensions in cm. 

Turns the aeration on or off.  
Adding air increases the intensity of the massage.  
If the jet massage is off, activating the aeration also turns on the jet massage (only 
when the tub is full).

Switches whirlpool programme P1 Soft or P2 Power on (only if the bathtub is full); pro-
gramme duration approx. 15 minutes. 

Any active massage or programme is switched off first. Start the programme again by 

pressing 

 or 

 again. The 

 or 

 key is illuminated when the programme is running. 

Functions activated by the programme are indicated by the key 

, 

 and 

 , which 

illuminate accordingly. The current programme can be stopped at any time by press-
ing 

 or 

.

Switches fresh water rinsing (special accessory) on and off when the tub is empty 
(please refer to page 18). 
Switches the disinfection system (special accessory) on and off when the tub is full 
(press and hold the key for at least 5 seconds, please refer to pages 16/17). 
The key is illuminated when the (special accessory) fresh water rinsing or the disinfec-
tion system is activated. 

The keylock is activated when the 

 key flashes, irrespective of which key is 

pressed. All functions are blocked.

Keylock

The keylock can be activated to prevent accidental or unauthorised activation of whirlpool func-
tions (e.g. by children).

Activating the keylock: 

Press the 

 key until the 

 key flashes.

Deactivating the keylock: 

Press and hold the 

 key until the 

 key no longer flashes.

The current keylock status is maintained even if the device is disconnected from the electrical 
power supply.

Set the direction of the massage jet by swivelling the jet nozzles or micro jet nozzles.

The supplementary heating (special accessory) is automatically switched on or off with the jet 
massage. The supplementary heating keeps the bath water hot. 

Operation