repabad Vision 1000, Operating Instructions Manual

6

0022771-01_BEDWHPV.1 12/2021 • 

repa

BAD GmbH • We reserve the right to make technical changes. All dimensions in cm. 

04 OPERATION WITH THE CONTROL PANEL

Three different control elements and electronic controllers are available for the whirlpool systems.

Vision 500

The whirlpool is operated using the Vision 500 control panel. The control panel is used 

to switch the fan on and off. It is infinitely adjustable. 
If whirlpool lighting (a special accessory) is fitted, you can switch it on or off.

The “fresh water rinse” function (a special accessory) is controlled via the control panel.
You can also use the control panel to select from two different whirlpool massage programmes.

Vision 700

The whirlpool is operated using the Vision 700 control panel. Use the control panel to  

switch the jet pump on and off. It is infinitely adjustable. 
If whirlpool lighting (a special accessory) is fitted, you can switch it on or off.

The aeration is switched on via key. 

If supplementary heating (a special accessory) is fitted, it is activated automatically when the jet 

pump is switched on. 
The “Automatic disinfection” and “Fresh water rinsing” functions (both special accessories) are con-
trolled via key.  
You can also use the control panel to select from two different whirlpool massage 
programmes.

Vision 1000

The whirlpool is operated using the Vision 1000 control panel. You can switch the fan and jet pump on 
and off using the control panel. The massage intensity can be precisely regulated with both systems. 

If whirlpool lighting (a special accessory) is fitted, you can switch it on or off.

The aeration is switched on via key. 
The supplementary heating (a special accessory) is automatically activated when the jet pump is 
switched on. The target temperature can be set and the current water temperature is shown on the 
display. 
The “Automatic disinfection” and “Fresh water rinsing” functions (both special accessories) are con-
trolled via key.  
You can also use the control panel to select from six different whirlpool massage programmes. 
         

“Night design” control panel illumination

All three control panel types have individual keys which remain subtly illuminated for some 60 minutes 
after the last input. Power consumption for this is extremely low (LED technology).

Operation