repabad Vision 1000, Operating Instructions Manual

8

0022771-01_BEDWHPV.1 12/2021 • 

repa

BAD GmbH • We reserve the right to make technical changes. All dimensions in cm. 

Increases the intensity of the air massage (if the air massage is on).  

The key illuminates if pressed and flashes when the maximum value is reached.

Reduces the intensity of the air massage (if the air massage is on). The key illuminates if 

pressed and flashes when the minimum value is reached.

Press once to turn on the LED whirlpool lighting (optional).  

Press again to set the next colour.

After pressing for a sixth time, the colours begin to change automatically, starting with 
magenta. Press again while the colours are alternating to choose the colour. The key 

flashes slowly.

Press again to restart the colour change process.

Press and hold to turn off the LED whirlpool lighting.

Switches the air massage interval function on (only if there is water in the bathtub). If 
the air massage is off, it is turned on when the interval function is activated. 
If the interval function is activated, the 

 key is illuminated as intensity increases and 

the 

 key as it decreases. 

Switches the whirlpool programme P1 Soft or. P2 Power on (only if there is water in the 
bathtub); programme duration approx. 15 minutes. 

Any active massage or programme is switched off first. Start the programme again by 

pressing 

 or 

 again. The 

 or 

 key is illuminated when the programme is running. 

Functions activated by the programme are indicated by the 

, 

 and 

 keys, which 

are lit up accordingly. The current programme can be stopped at any time by pressing 

 or 

.

Switches fresh water rinsing (a special accessory) off manually if the bathtub is empty. 
Please also refer to page 18.  
The key is illuminated if automatic fresh water rinsing (a special accessory) is activated 
several minutes after emptying the bathtub. Automatic fresh water rinsing cannot be 
interrupted.

The keylock is activated when the 

 key flashes, irrespective of which key is 

pressed. All functions are blocked.

Keylock

The keylock can be activated to prevent accidental or unauthorised activation of whirlpool func-
tions (e.g. by children).
Activating the keylock: 

Press and hold the 

 key until the 

 key flashes.

Deactivating the keylock: 

Press and hold the 

 key until the 

 key no longer flashes.

The current keylock status is maintained even if the device is disconnected from the electrical 
power supply.

Operation