KrosFlo® TFF System – Auxiliary Scale ACSS-60K
User Guide
21 repligen.com 420-14871-002 Rev. 00
Enter
<P7.Othr>
submenu and change the settings as desired. Refer to the below table:
Table 8. GLP date and time printout variable list
Submenu
Description
<7.4.SdAt>
Enter this parameter to set current date, where the date format is
YYYY.MM.DD*
<7.5.Stnn>
Enter this parameter to set current time, where the time format is
24H**
<7.6.FdAt>
Enter this parameter to set date format. Available values:
1
- DD.MM.YYYY,
2
- MM.DD.YYYY,
3
- YYYY.MM.DD* (set by default),
4
- YYYY.DD.MM
<7.7.Ftin>
Enter this parameter to set time format. Values:
24H**
(set by default),
12H**
*
Date format: Y – year, M – month, D – day.
** Time format: 12H – 12-hour format, 24H – 24-hour format.
9.5
Default user settings
Parameter allowing to restore default operator settings.
1.
Enter
<P7.Othr / 7.8.dFL>
submenu, text
<Cont?>
is displayed (Continue?).
2.
Press
key to confirm. The process of restoring default settings starts, this is signaled
with display of ‘dash’,
<- >
.
3.
Upon process completion,
<7.8.dFLu>
submenu is displayed. Return to the home screen.
10.
Scale Data
Scale Data menu,
<P8.InFo>
, provides information on the weighing device and its program. The
parameters serve informative purposes:
Table 9. Scale Data
Submenu
Description
<8.1.Idb>
Serial number of the scale
<8.2.PurS>
Program version
<8.4.PStP>
Settings printout. Enter the parameter to send scale settings to printer port (all parameters)
11.
Working modes – General information
The scale features the following working modes:
•
Weighing
•
Parts Counting
•
+/- control
•
Percent Weighing %
•
Peak Hold
•
Totalizing
•
Animal Weighing
