Repotec RP-UPH, User Manual

6 

3. SYSTEM DESCRIPTION 

Display Panel for 1KVA(L)~ 3KVA(L)

Figure 1: Display Panel 

Switch Function 

ON/OFF 

CONTROL 

KEY(4) 

When this key is pressed with the LCD Select Down-key 
simultaneously for 3 seconds, the UPS will be switched on. 
Besides, in the mode of battery back-up, press both of this 
key and LCD Select Up-key at the same time to disable the 
beeps. 

Select 

Up-key(2) 

It is pressed to select upward the UPS status on LCD 
Display. When this key is pressed with the LCD Select 
Down-key simultaneously for 3 seconds, the UPS will be 
switched off. 

Select 

Down-key(3) 

It is pressed to select downward the UPS status on LCD 
Display. 

7

Display Function 

LCD 

Display(1)

This indicates the UPS operation information, including UPS 
status, input/output voltage, input/output frequency, battery 
voltage, battery capacity left, output load, inside temperature, 
and the times of history events. Besides, UPS output voltage 
and output frequency can be set from the LCD panel. 

Fault LED 

(5) 

This red LED indicates the UPS is in fault condition because 
of inverter abnormal or over-temperature or DC_BUS fault. 

Warning 

LED (6) 

This yellow LED indicates the UPS is in the status of overload, 
bypass or battery back-up. 

Normal 
LED (7) 

This green LED indicates the UPS is operating normally. 

3.1 Outline Description 

1KVA Tower Case