A.
WPS Information on AP:
On Network AP list, double click on the AP then you can see the
information appears below.
Items
Information
Authentication Type
There are three authentication modes supported by this utility. They are
open, Shared, WPA-PSK and WPA system.
Encryption Type
For open and shared authentication mode, the selection of encryption
type are None and WEP. For WPA, WPA2, WPA-PSK and WPA2-PSK
authentication mode, the encryption type supports both TKIP and AES.
Config Methods
Correspond to the methods the AP supports as an Enrollee for adding
external Registrars. (a bitwise OR of values)
Device Password ID
Indicates the method or identifies the specific password that the selected
Registrar intends to use. APs in PBC mode must indicate 0x0004 within
two-minute Walk Time.
Selected Registrar
Indicates if the user has recently activated a Registrar to add an Enrollee.
The values are "TRUE" and "FALSE".
State
The current configuration state on AP. The values are "Unconfigured"
and "Configured".
Version
WPS specified version.
AP Setup Locked
Indicates if the AP has entered a setup locked state.
UUID-E
The universally unique identifier (UUID) element generated by the
Enrollee. This is a 16 byte value.
RF Bands
Indicates all the RF bands available on the AP. A dual-band AP must
provide
it. The values are "2.4GHz/5.8GHz" and "5GHz".
January 13, 2009 / Version: 2.0
26
