3.
Country Region Code:
eight countries to choose. Country channel list:
Classification
Range
0: FCC (Canada)
CH1 ~ CH11
1: ETSI
CH1 ~ CH13
2: SPAIN
CH10 ~ CH11
3: FRANCE
CH10 ~ CH13
4: MKK
CH14 ~ CH14
5: MKKI (TELEC)
CH1 ~ CH14
6: ISRAEL
CH3 ~ CH9
7: ISRAEL
CH5 ~ CH13
Note:
Country Region code is not support for Vista.
4.
Beacon (ms):
The time between two beacons. System default is 100 ms.
5.
TX Power:
Manually force the AP transmits power. System default is 100%.
6.
Idle Time:
Manually force the Idle Time using selected value. Default is 300.
7.
Channel:
Manually force the AP using the channel. System default is channel 1.
8.
Use Mac Address:
Use MAC address of used wireless card to be AP name. System default is
APX (X is last number of Mac Address).
9.
Security Setting:
Authentication mode and encryption algorithm used within the AP. System
default is no authentication and encryption.
10.
No forwarding among wireless clients:
If there is no beacon among the wireless clients,
they can’t share information with each other.
11.
Hide SSID:
Prevent this AP from recognized in wireless network. This is disabled as default.
12.
Allow BW40 MHz:
Allow BW40 MHz capability.
13.
Default:
Use system default value.
14.
Cancel:
Cancel the above changes.
15.
Apply
: Apply the above changes.
January 13, 2009 / Version: 2.0
39