21
7 Wash and rinse temperature, wash time and extra rinse cycles
7 Wash and rinse temperature, wash time
and extra rinse cycles
7.1 Open “Menu mode”
To be able to check and adjust the current settings
of your Solo Rescue® you will have to open “Menu
mode” on the display on the front of the machine.
1. Press the red “STOP” button (#2) and then
press button #4 (long program) five (5) times.
2. While in “menu mode”, use button #3 or #4 to
move through the various menu options. The
first number in the display indicates the menu
number.
7.2 Menu 8 – Adjusting the wash
temperature*
The temperature can be set to a value between
30°– 60°C and the interval can be changed with
one (1) degree steps.
1. To adjust the wash temperature, press button #5.
2. To save the new setting, press the “START”
button (#1).
3. To exit “menu mode”, press the “STOP” button (#2).
7.3 Menu 9 – Adjusting the rinse
temperature*
The temperature can be set to a value between
30°– 60°C and the interval can be changed with
one (1) degree steps.
1. To adjust the rinse temperature, press button #5.
2. To save the new setting, press the “START”
button (#1).
3. To exit “menu mode”, press the “STOP” button (#2).
7.4 Menu 0 – Adjusting the wash
time for ”Long Program”
The washing time can be set to a value between
5–30 minutes and the interval can be changed with
one (1) minute steps.
1. To adjust the washing time, press button #5.
2. To save the new setting, press the “START”
button (#1).
3. To exit “menu mode”, press the “STOP” button (#2).
7.5 Menu 11 – Adding extra rinse cycles
Adjustable range: 1– 4 rinse cycles. Dosage pump
for rinse/disinfection/defoamer is always activated
on first rinse only.
1. To adjust the number of rinse cycles, press
button #5.
2. To save the new setting, press the “START”
button (#1).
3. To exit “menu mode”, press the “STOP” button (#2).
*Important!
Always follow the temperature
recommendations from your equipment
manufacturer. Washing in the wrong
temperature may cause damage to your
equipment and may void all warranty.
