background image

Manufacturer:

 ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. 

Distributed by: 

ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA. 

 ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK. See www.resmed.com for other ResMed locations worldwide.

S9: Protected by one or more patents: AU 691200, AU 697652, AU 702820, AU 709279, AU 724589, AU 730844, AU 736723, AU 750095, AU 750761, AU 764761, AU 779327, AU 2007252223, CN 

200780001837.6, EP 0651971, EP 0661071, EP 0920845, EP 0927538, EP 0934723, EP 1028769, EP 1126893, EP 1144036, EP 1502618, EP 2032857, JP 3580776, JP 3778797, JP 4647786, NZ 504595, 

NZ 570415, NZ 573921, NZ 577485, US 5704345, US 6138675, US 6240921, US 6363933, US 6367474, US 6425395, US 6502572, US 6591834, US 6675797, US 6745768, US 6817361, US 6988498, 

US 7040317, US 7100608, US 7537010, US 7866944. Other patents pending. Protected by design registrations: AU 329025, AU 330142, AU 331272, AU 332891, AU 333858, CN 200830346524.1, CN 

200830346526.0, CN 200830346525.6, CN 201030215797.X, EU 1067417, JP 1377401, JP 1377402, JP 1377403, JP 1415251, JP 1415252, NZ 411762, NZ 413090, NZ 413091, US D629891, US 

D629892, US D635232, US D635244, US D635245, US D635654, US D638536, US D638537, US D638933. Others pending. S9, S9 AutoSet, S9 Elite, ClimateLine, SlimLine and SmartStart are 

trademarks of ResMed Ltd. S9, AutoSet, ClimateLine, SlimLine and SmartStart are registered in U.S. Patient and Trademark Office.

© 2011 ResMed Ltd. 368147/2 2011-08 

Global leaders in sleep and respiratory medicine    www.resmed.com

User Guide

English • Deutsch • Français • Italiano • Español • Português • Nederlands • 

Ελληνικά

 • Polski • Magyar • 

Pусский

 • 

Türkçe • 

Česky

 • Slovensky

S9

 Series

AutoSet

 & Elite

POSITIVE AIRWAY PRESSURE DEVICES

A

B

C

3

1

2

4

5

3

1

2

4

6

5

S9 AutoSet S9 Elite User Guide Cover.indd   1

4/08/2011   10:03:05 AM

Summary of Contents for S9 AutoSet














Reviews: