background image

Installation Guide: RE508X Hardwire to Wireless Translator™

•  Selectable wireless panel compatibility

•  Rechargeable backup battery

•  Accepts any existing hardwire zone type

•  Automatic zone polarity and end of line detection

•  Battery backed 12VDC output for powered zones

•  Cover tamper

• 

Certified to UL1023 and ULC1023

       PANEL ENROLLMENT 

(For full zone enrollment instructions, refer to Advanced Setup, step 3)

A

  Enroll Translator into Panel.

•  Trip the translator tamper to enroll the translator into the panel (For Honeywell® and 2GIG® 

panels select loop 1).

-or-

•  Enter translator ID into panel.  The translator’s base ID is printed on the bar code label and ends with a 0. 

B

  Enroll Zones into panel (not required for Cryptix®

 Installations)

•  With the cover open, trip each zone to enroll into to the panel (For Honeywell® and 2GIG® 

panels select loop 1).

-or-

•  Enter ID into panel.  For non-powered zones, the zone ID is the translator’s base ID with the last digit replaced with zone

number 1-8.  

Features

      FINISH

A

  Close the cover.  Test and verify proper operation of the sensors at the panel.

B

  Cut the lock wire to lock the translator (For more information on locking, refer to Advanced Setup, step 4).

C

  Secure cover with screw. 

 

WIRING DIAGRAM

Wall mounting

screw locations

      MOUNT AND WIRE

A

  Select a mounting position and location. 

 Wire the zones.

 Connect 12VDC output to powered zones, if any. 

D

  Connect the power supply to the translator.

•  Ensure the translator cover is open before power-up.

1

2

3

4

Quick Setup

      TRANSLATOR CONFIGURATION

A

  Select the brand of panel that the translator must 

talk to using the “PANEL SELECT” knob.

B

  Configure Zones.

•  No zone configuration is necessary for installations with normally

closed zones that don’t require tamper detection.

•  Installations with other zone types:  Refer to the Advanced Setup, step 2.

(Mounting hardware not included.  Use two 

#4 or # 6 screws for mounting )

INSTALLATION VIDEOS and PRODUCT INFORMATION: 

http://resolutionproducts.com/products/translators-repeaters/universal-translator/

Reviews: