background image

Specifications

PHYSICAL

Housing Body Dimensions
Housing Base Dimensions
Weight with Battery
Mounting Fastener

8.9 x 8.9 x 1.5 inches  (22.6 x 22.6 x 3.8 cm)
8.2 x 1.3 x 2.7 inches  (20.8 x 3.3 x 6.7 cm)
26.8 ounces  (760 grams)
#6 or #8 screws (not provided)

ENVIRONMENTAL

Operating Temperature
Storage Temperature
Maximum Humidity

32  to 120 °F  (0 to 49 °C)
-4 to 86 °F (-20 to 30 °C)
85% non-condensing relative humidity 

PANEL SPECIFICATIONS

Radio Frequencies
Power Supply Part Number

Input
Output

Battery Part Number

Backup

Specifications

Battery Charger
Current Draw
Tamper Indications
Sensors
Interface Devices

Maximum Number of Users

433.92MHz, 2.4GHz
RE012-6 (US), RE012-7 (AUS), RE012-8 (CE)
100-240VAC, 50/60 Hz, 0.5A
12VDC, 1A
RE029
24 hours minimum
6VDC, 2.5Ah, NiMH
25mA (Trickle), 95mA (Fast)
150mA (Normal), 300mA (Alarm)
Cover opening and Wall removal
Up to 96 CryptiX Encrypted Wireless Security Zones
Up to 8 PINPads (RE652)
Up to 8 HeliPads (RE656) and/or mobile devices
50

CERTIFICATIONS

RE6100

RE6110
RE6120

UL1023, UL985, UL1635, ORD-C1023-1974, ULC-S545-M89, 

ETL, FCC, IC
EN 60950-1, EN 300 220, EN 301 489, RCM
EN50131-3, EN 60950-1, EN 300 220, EN 301 489, CE

47-0009-08 • RevC • 2016-09-21

Tech Support Line (877) 260-5578

www.ResolutionProducts.com

WARRANTY

Resolution Products, Inc. will replace products that are defective in 

their first five (5) years.

IC NOTICE

This device complies with Industry Canada license-exempt RSS 

standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference 

that may cause undesired operation of the device.

Le présent appareil est conforme aux cnr d’Industrie Canada 

applicables aux appareils radio exempts de licence. L’exploitation 

est autorisée aux deux conditions suivantes:

(1) L’appareil ne doit pas produire de brouillage, et

(2) L’utilisateur de l’appareil doit accepter tout brouillage 

radioélectrique subi, même si le brouillage est susceptible d’en 

compromettre le fonctionnement.

IC: 8310A-RE6100

FCC NOTICE

This device complies with Part 15 of the FCC rules. Operation is 

subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference that may be received, 

including interference that may cause undesired operation.

Changes or modifications not expressly approved by the Resolution 

Products, Inc. could void the user’s authority to operate this 

equipment.
FCC ID: U5X-RE6100

CE DECLARATION OF CONFORMITY

Hereby, Resolution Products, Inc. declares that this RE6120 is in 

compliance with the essential requirements and other relevant 

provisions of directive 1999/5/EC.

(This declaration can be translated to other languages via a myriad 

of translation tools found on the Internet.)

Specifications subject to change without notice.

Summary of Contents for RE6100













Reviews: