8
Connect universal FM receiver to a
FM transmitter
4
Except for the EO-98 models. For these, manually switch to the FM program.
Connecting ReSound hearing instrument(s) to a FM transmitter using a
universal FM receiver via a DAI adaptor
• Connect the DAI to the hearing instrument.
• Connect the universal FM receiver to the DAI shoe.
• The hearing instruments will automatically switch to the FM program
4
.
ReSound Up Smart BTE and Super Power models with LED will blink
for FM confirmation.
• Turn on the transmitter (The screen should light up).
• Make sure the transmitter is charged.
• Connect the FM receiver with the transmitter; place hearing instrument(s)
with the FM receiver connected within 10-35cm (4-20 inches) of the
transmitter.
• Briefly press the Connect key on the transmitter.
• Verify that the sound is being transmitted by tapping the transmitter
microphone sound should be audible in the hearing instrument(s).
• For further details on how to connect refer to your guide provided for the
FM system you are using.
Transmitter compatibility
FM02 compatibility
Phonak transmitters
Phonak inspiro
Phonak SmartLink
Phonak ZoomLink
Phonak EasyLink
FM02 compatibility
Oticon transmitters
Oticon Amigo T20/21
Oticon Amigo T30/31
Universal receiver compatibility
Phonak universal receiver compatibility via DAI
Phonak Roger
Phonak MLxi
Phonak MicroMLxS
Oticon universal receiver compatibility via DAI
Amigo R2
