2
3
Connection Flow
1. Select instrument configuration and click “Continue.”
3. Calibration of the hearing instruments is required in order to activate DFS Ultra II. Inform your
patient that he or she will hear a buzzing sound and should sit still and quiet during calibration.
Click “Calibrate” in the lower right corner. When calibration is complete, click “Continue.”
2. Select the appropriate physical properties for each hearing instrument and click “Continue.”
1
Smart Launcher
Both ReSound Aventa and ReSound Smart Fit are contained within one software installation. The
Smart Launcher will detect both ReSound LiNX 3D and legacy instruments, and then retrieve the
software appropriate for the connected device(s).
1. Insert the battery, wait two minutes and close the battery door of each hearing instrument to
be programmed.
2. Click “Connect” in the upper right of the Launcher screen.
Select Instruments
The hearing instruments will appear in the “Select Instruments” section.
1. Once the hearing instruments have been identified as right and left, click “Continue,” located at the
bottom right of the screen.
2
3
2
1
