12
13
3. While pairing mode is activated, close the battery doors
of both hearing instruments and make sure they are ON. A
successful pairing will be indicated by an audible melody
played in both hearing instruments.
You are now ready to use the resound unite™ Mini Microphone!
Pairing the Mini Microphone in Channel 2 or 3
To pair the Mini Microphone in Channel 2, press the pairing button
twice. The Led will now blink yellow twice every 2 seconds to in-
dicate that it is ready to be paired in Channel 2. Close the battery
doors on the hearing instruments.
Pairing to your hearing instruments
Note! The following information is intended primarily for your
Hearing Healthcare Professional, who in most cases will com-
plete the tasks that are necessary before the ReSound Unite™
Mini Microphone can be used with your hearing instruments.
However, the process is designed to be simple and most people
can do it themselves.
It is possible to pair up to three ReSound Unite™ streaming de-
vices—e.g. one Mini Microphone and two TV streamers (an op-
tional ReSound Unite™ accessory)—with a given pair of hearing
instruments. Therefore, channel 1, 2 or 3 must be selected when
starting the pairing process.
Pairing the Mini Microphone in Channel 1
1. Make sure resound unite™ Mini Microphone is turned ON.
Your hearing instruments must be OFF—the battery doors
must be open.
2. remove the silver cap from the Mini Microphone. With the
tip of a pen or similar object, press the small pairing
button one time on the front of your resound unite™ Mini
Microphone (see picture on the next page). The Led will
now blink yellow once every 2 seconds to indicate that
it is ready to be paired in Channel 1. Your resound unite™
Mini Microphone will remain in pairing mode for 20 seconds.
