18
19
Cleaning the Earmould
The earmould should be cleaned regularly:
1. Remove the earmould and the tubing from the hearing instrument
before you clean it.
2. To clean the earmould, rinse with
lukewarm water.
3. If ear wax is stuck in the sound
canal of the earmould, the
cleaning loop or a syringe with
lukewarm water can be used to
“push” the wax out.
4. Blow gently through the tubing to remove moisture trapped inside.
5. Be sure to thoroughly dry the earmould and its tubing before
reconnecting it to the hearing instrument.
The tubing connecting the earmould to the hearing instrument should
be changed if it becomes stiff or brittle. Contact your hearing care
professional to change the tubing when needed.
Maintenance
Daily Maintenance
It is important to keep your hearing
instrument clean and dry every day. To
clean the instrument, use a soft cloth.
If the instrument has been exposed to
high humidity or perspiration, use a
drying kit that is available from your
hearing care professional.
To avoid the need for repairs:
1. Never immerse the instrument in water or other liquids since this may
cause permanent damage to the hearing instrument.
2. Protect your hearing instrument from rough handling, and avoid
dropping it on hard surfaces or floors.
3. Do not leave the instrument in or near direct heat or sunlight since
excessive heat can damage the instrument or deform the casing.
Summary of Contents for X-plore BTE XE81-DVI
Page 16: ...30 31...
