16
WARNING:
The rules about electrical local standards must be adhered
to during product installation.
WARNING:
Check for any damage on the product before installing it. Do
not have product installed if it’s damaged. Damaged products pose danger
for your safety.
Important Warnings for Installation:
Cooling fan shall take extra steam out and
prevent outer surfaces of appliance from
overheating during operation of oven.
This is a necessary condition for better
appliance operation and better cooking.
Cooling fan shall continue operation after
cooking is finished. Fan shall automatically
stop after cooling is completed.
A clearance must be left behind the
enclosure where you’ll place the appliance
for efficient and good operation.
This clearance shouldn’t be ignored as it’s required for ventilation system
of the appliance to operate.
Right Place For Installation
Product has been designed to be mounted to worktops procured from
market. A safe distance must be left between the product and kitchen
walls or furniture. See the drawing provided on the next page for proper
distances. (values in mm).
•
Used surfaces, synthetic laminates and adhesives must be heat
resistant. (minimum 100 °C)
•
Kitchen cupboards must be level with product and secured.
•
If there is a drawer below the oven, a rack must be placed between
oven and drawer.
WARNING:
Do not install the product next to refrigerators or coolers. The
heat emitted by the product increases the energy consumption of cooling
devices.
WARNING:
Do not use door and/or handle to carry or move the product.
Figure 1
GB
