1 Hood body
2 Control panel
3 Glass steam screen
pivotally
4 Aluminium Grease filter
5 Filter fixing bolt
to open, push in direction of arrow
6 Filter mat
*
7 Filter mat fixing bracket
*
8 Upper exhaust air opening
9 Rear exhaust air opening
*
10 Upper exhaust air cover
11 Hood suspension eyelets
12 Rear exhaust air cover
*
13 Holes for locking screws
* depending on Model
Carbon filter required.
(not included in delivery)
To switch to recirculation mode, remove the mode
selection block.
To do this, first disconnect the hood from the power
supply and remove the aluminum grease filters (4).
Then mount the carbon filter by guiding it to the filter
holder at the bottom of the motor and tightening it by
turning it clockwise. (Bayonet lock)
Wechseln Sie den Kohlefilter alle 3 Monate oder
früher, je nach Kochgewohnheiten.
Drawings/Pictures are for illustration purposes only
CHANGEOVER TO CIRCULATION AIR MODE
English Installatio- / User's Instruction
14. COMPONENTS OF STANDARD COOKER HOODS
EXHAUS AIR MODE
(Factory setting)
to remove, press ends of brackets down and
remove them from the anchorage
Change positioning flange (10) and blind cover
(12) where necessary
GB
1
5
6
8
9
10
11
12
13
5
6
7
7
Min. 65 cm
Max. 75 cm
3
2
1
4
5
Mode
‐
selection
block
fi210413xin
8