1-866-876-8044 • 416-615-0214 • www.respicaire.com
Step 1
Use rubber template for installation location.
Peel off backing and mount. (Figure 1)
Step 4
Step 2
Cut access hole in duct. (Figure 2)
Step 3
Mount base plate to duct as shown - 4 screws.
(Figure 3)
Figure 2
Figure 1
Figure 3
Figure 4
Slide the complete assembly into the base plate as shown.
Depress the upper & lower, UV module locking tabs,
to “snap” into place.(Figure 4)
6RDOXY-inst2
Up
Upper Locking Tab
Lower Locking Tab
