EN
ENGLISH
6
Check the medication nebulizer cup for
damage. (The nebulizer cup enclosed
with your Inspiration Elite should be
replaced regularly. Ask your healthcare
provider for replacement guidelines and
supplies).
Place your Inspiration Elite unit on a
firm, flat surface near an electrical outlet
and in an area where you can be seated
comfortably during your treatment.
Plug the power cord into the electrical
socket.
Do not operate the unit without the filter
or with a clogged (dirty) filter. Operating
the unit with a dirty filter can impair
proper operation and cause damage that
is not covered by the warranty.
Wash your hands before preparing your
medication.
Assemble your nebulizer cup and add
your prescribed medicine following your
prescription and the separate nebulizer
instructions.
Connect one end of the tubing to the
bottom of the cup and the other end of
the tubing to the air outlet on the unit.
Turn the power switch on (
I
) to begin
your treatment.
When your treatment is complete, turn
the power switch off (
O
) and unplug the
unit.
Clean the medication nebulizer cup
according to its instructions.
1
2
3
How to use your
Inspiration Elite
4
Care and cleaning
5
6
7
8
9
10
l
Unplug the unit before cleaning.
l
Use a damp cloth to wipe down the outside of the
compressor at least once each month (or more if
necessary).
l
Check the filter at least once each week. Replace
the filter when dirty. Replacement filters are
available where you purchased this product.
l
Pack of 4: Part No. 1054388
l
To change the filter:
l
Lift up the filter and remove it by twisting and
pulling it straight up.
l
The filter should be replaced when it becomes
discoloured. Do not wash or reuse the filter.
l
After each cleaning, check that the unit is working
properly by verifying that air still comes out of the
nozzle when the unit is turned to the
ON
position.
l
The unit is oil-free. Do not lubricate.
l
Service should only be performed by an authorised
dealer. Unauthorised repair voids warranty.
KEEP THESE INSTRUCTIONS FOR FUTURE USE
Glossary of symbols
Caution: check the operating instructions
Follow operating instructions
~
Alternating current
RH
Relative humidity
P
Atmospheric pressure
I/O
Switch ON/Switch OFF
Class II unit
Type B
Temperature limitations
Separate collection
0123
This device meets 93/42/EEC directive.
12049_RIUK_InspirationEliteInstPAGES_SEUROPE_1054391_REV2_v1.indd 2
26/10/09 15:33:19
