background image

ACCESSORIES

12

Eclipse E100

EXTENDING YOUR E100 WIREFREE ALARM SYSTEM

Y

ou may add Wirefree Magnetic Contact Detectors and additional Wirefree PIR Detectors etc. from the CA2000

range of accessories as required, to give additional protection where needed.  The following accessories are also

available to extend and enhance your system.

E100D

STROBE UPGRADE

(This part only)

CA2000STR

CA2000M

OFF

1

3

2

4

ON

CA2000KP

STROBE UPGRADE
CA2000STR

Add to your existing Sir

en Unit to give full Siren & Strobe protection.

The Strobe Flash Light is activated simultaneously with your siren

which will help identify a house in alarm condition.

DUMMY SIREN E100D

The Sir

en is available as a dummy design and acts as an excellent

visual deterrent.

WIREFREE MAGNETIC CONT

ACT DETECTOR

CA2000M

Pr

otect opening doors and windows using this slimline Wirefree

Magnetic Contact Detector.  Simple to install on most doors and

windows using the double sided adhesive pads or screws supplied.

The detector senses when the magnet moves away from the side of

the detector and sends a coded radio signal to the Solar Siren to

initiate an alarm. 

Supplied complete with 2 x 3 Volt Lithium batteries.

WIREFREE SECURITY KEYP

AD CA2000KP

This small batter

y operated keypad requires no wiring and is fitted in

minutes.  It sends security coded radio signals to your Siren and only

allows access to those who know your user changeable access code. 

Designed for installation inside the property 

the Keypad allows you

to set a 15 second Entry/Exit Delay on your system for greater

flexibility. 

The ideal location for the Keypad is nor

mally adjacent to

the main entrance door for easy access when entering or leaving the

premises.  Supplied complete with 9 Volt alkaline battery.

Summary of Contents for E100 Wirefree

















Reviews: