FOREWORD
Your decision to purchase an RE5000S Remote
Control Wireless Intruder Alarm System represents a
major and sensible step towards total protection of
your premises, its contents and its occupants.
The RE5000S Wireless Intruder Alarm System
complies with the requirements of BS 6799 Class 3
for Wire-free Intruder Alarm Systems. All components
are designed and manufactured to provide a high
standard of security protection and long, reliable
service. In addition, the radio devices are tested and
approved to ensure that they will not interfere with
other radio equipment. The equipment complies with
the Radio & Telecommunications Terminal Equipment
Directive 1999/5/EC and with EC Directive 89/336/EC
in respect of Electromagnetic Compatibility for a
Domestic and Light Commercial Environment. No
radio license is required, however the approved radio
frequency is not protected from interference and may
be withdrawn from use at any time subject to the DTI
giving users an appropriate notice period.
The RE5000S Wireless Intruder Alarm System is
purposely designed for ease of installation using only
conventional tools. However, it is essential that the
installer reads and fully understands the advice and
procedures contained in this manual before
proceeding with the installation.
During installation, it is important that the installer
follows the procedures in sequence.
All components with the exception of the external
Solar Wireless Siren & Strobe are suitable for indoor
use only.
This manual should be retained by the user for future
reference.
Tools and Equipment Required:
150mm flat blade screwdriver
150mm cross-head screwdriver
Hammer
Drill and 4mm and 5mm masonry drill bits
SAFETY WARNINGS
Before proceeding with the installation, please note
the following safety warnings:
1. Always follow the manufacturers advice when
using power tools; steps; ladders etc. and wear
suitable protective equipment (eg. safety goggles)
when drilling holes etc.
2. Before drilling holes in walls, check for hidden
electricity cables and water pipes. The use of a
cable/pipe locator may be advisable if an any
doubt.
SYSTEM SECURITY
The system may be operated remotely from one
or more Remote Controls, or by entering an Access
Code at the control unit keypad. Care should be
taken to ensure that your Remote Control Unit(s) are
not lost as the finder could Disarm your alarm before
you are able to re-code the system.
This system has been designed to both detect
intruders and act as a strong deterrent to would-be
intruders. However, we recommend that an Intruder
Alarm System is always used in conjunction with
good physical protection such as security window
and door locks.
Response
RE5000S Professional Alarm System
