Retekess TR604W, User Manual

1. This unit has the function of AC&DC available power supplying, AC voltage is 110V 60Hz, DC voltage is   

 4.5V (3x1.5V R20/D size ) .

2. When use the AC power, please connect the inlet of the AC cord with the socket jack (11), and put the plug  

of the AC cord into power board or the power socket on the wall.  

3. When use the DC power, please operate as the following procedures;

    1) Push down the battery doorlocks by hands and take apart the battery door (12).

    2) Aiming the polarity of the battery, put into 3 pcs 1.5V R20/D size.

    3) Closed the battery door.

Local Government Regulations

When radios are used as a consequence of employment, the Local Government Regulations requires users 

to be fully aware of and able to control their exposure to meet occupational requirements. Exposure 

awareness can be facilitated by the use of a product label directing users to specific user awareness 

information. Your Retekess radio has a RF Exposure Product Label. Also, your Retekess user manual, or 

separate safety booklet includes information and operating instructions required to control your RF exposure 

and to satisfy compliance requirements.

POWER SUPPLY

RADIO OPERATION

1. Move the power switch (6) between on and off to control.

2. Move the band switch (7)  to the band you want to listen: AM or FM or WB, after  band selected, turn the tuning 

    knob (9) and watch the dial  pointer (4) on dial scale (3)  to search your  desired station program.

3. Use volume control (6) to regulate the large or small volume of the sound.

4. Use high & low tone (8)  for your preference.

5. You can  see earphone to  listen to radio  in case of  disturb other people.  Insert the earphone  plug into 

    “earphone jack” (10).

ANTENNA OPERATION

1. When listen to FM or WB, please pull out the FM antenna (2)  to obtained the best effect.

2. When receiving AM, it's using the internal  magnetic antenna, you can get the optimum reception by rotating 

    the direction of  the radio.

MAINTENANCE

1. Please put this unit at well ventilated place, don’t use it in high temperature or humid environment.When main-

    tain this radio, please clean up this machine with soft cloth, but with out any lubricant,alcohol etc volatile liguid.

2. The machinery parts of this machine have been fully lubricated by factory before delivery.

WARNING

RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE

Before using this radio, read this guide which contains important operating instructions 
for safe usage and RF energy awareness and control for compliance with applicable 
standards and regulations.

Just to be on the safe side, please pull out the AC plug from power supplying before installing batteries.

Please try to use the AC power supplying due to because the time is limited for batteries proving power.

NOTICE