background image

DIGITAL TWO WAY RADIO

DIGITAL TWO WAY RADIO

Antennas

•Do not use any portable radio that has a damaged 

antenna. If a damaged antenna comes into contact 

with the skin when the radio is in use, a minor burn 

can result.

Batteries (If appropriate)

•When the conductive material such as jewelry, 

keys or chains touch exposed terminals of the 

batteries, may complete an electrical circuit (short 

circuit the battery) and become hot to cause bodily 

injury such as burns. Exercise care in handling any 

battery, particularly when placing it inside a pocket, 

purse or other container with metal objects

Long transmission

•When the transceiver is used for long 

transmissions, the radiator and chassis will become 

hot.

Avoid Burns

•This radio meets the RF exposure guidelines when 

used with the Retevis accessories supplied or 

designated for the product. Use of other 

accessories may not ensure compliance with the 

RF exposure guidelines and may violate 

regulations.

•For a list of Retevis-approved accessories for your 

radio model, visit the following website: 

http://www.Retevis.com

Approved Accessories

Forbid

•Do not use charger outdoors or in moist 

environments, use only in dry locations/conditions.

•Do not disassemble the charger, that may result in 

risk of electrical shock or fire.

•Do not operate the charger if it has been broken or 

damaged in any way.

•Do not place a portable radio in the area over an 

air bag or in the air bag deployment area. The radio 

may be propelled with great force and cause 

serious injury to occupants of the vehicle when the 

air bag inflates.

To reduce risk

•Pull by the plug rather than the cord when 

disconnecting the charger.

•Unplug the charger from the AC outlet before 

attempting any maintenance or cleaning.

•Contact Retevis for assistance regarding repairs 

and service.

•The adapter shall be installed near the equipment 

and shall be easily accessible

Safety Operation

33

34

EU Importer:

Importer:Germany Retevis Technology GmbH

Address:Uetzenacker 29,38176 wendeburg

Summary of Contents for RT53



















Reviews: