background image

To users:

Thank you for your favor with our products.We are dedicated 

to providing high performance and high stability radio 

communication products. This two-way radio is no 

exception. The radio is a DMR dual-slot digital walkie-talkie 

developed and produced by my team with 1024 memory 

channels, 800 memory Contact Person. In order to make 

you fully understand the various advantages of the radio 

performance and use and maintenance methods, please 

Main Features

UHF Full-Frequency Radio

Frequency range:UHF400.000-470.000MHz

DMO True2-Slot dual time slot

Direct mode dual-slot communication achieves two groups of 

calls at a frequency point at the same time, so  that the 

communication efficiency is doubled and frequency resources 

are saved

Digital and analog compatible

Support DMR digital and analog two communication modes to 

ensure that the original analog products smooth transition to 

digital products to meet different communication needs

Digital signaling function

Rich calling modes that support DMR protocol, including single 

call, group call and all call; supports remote inhibit function and 

other applications

High sound quality

This digital two-way radio uses advanced AMBE +2TM voice 

processing technology to achieve higher quality

High/low power switch

2W/0.5W power switch, Meeting the power requirements of 

different call distances to save more energy

Alarm function

Supporting general alarm and silent alarm in emergency 

situations

Digital mode supports the use of repeater

Side buttons can be customized without changing the 

user’s operating habits

DIGITAL TWO WAY RADIO

01

02

Summary of Contents for RT53



















Reviews: