Retigo Gun 25, Operation Manual

Instructions for use

When purchasing spray material, please ensure that they are not harmful to the environment;
for example, the lable with the blue environment symbol. Paint dealers will be able to give
you useful tips on this.

Spray material

Note: 

for the perfect functioning of the spray gun clean spray material is of the importance.

In case of doubts regarding any impurities, a fine-meshed filtering of the spray material is
recommended.
Products containing granules or bodies must not be sprayed. These act abrasively and
shorten the service life of the pump and valve.
This invalidates the warranty for these parts

Spraying

Danger of fire and explosion! !

 Explosive gases may occur when spraying inflammable and

toxic materials.

Regulating the Spray Jet

Turn the regulating knob completely to the left. (Picture

 1

)

Switch on the device
Turn the regulating knob to the right until the spraying cone and atomization are correct.
The spray mist should be even, fine and without drops.
Readjust the spray jet before every spraying operation.

Spraying

Always screw down the container firmly. (Picture

 2

)

A test should be carried out to determine the most effective distance from the spraying
surface. Start at a fairly large distance. Ensure that you keep at a constant distance and that
your movements are steady. The distance of the nozzle from the workpiece depends on the
spray material (approx. 20-35 cm spraying distance depending on the cone of the jet and the
thickness of the paint to be applied).

Note:

 Spraying material  tends to drip off vertical surfaces.

Perform an initial spraying from a slightly greater distance and allow the paint to start to dry.

Never spray until the container is empty.

 The suction pipe must always be immersed in

liquid. Otherwise the paint aerosol will stop and thicker drops will be sprayed. Always hold
the spray gun upright.

Care and Maintenance

Always disconnect the plug from the power socket before carrying out any work on the
appliance.

Always keep the device clean.

Never immerse the device in cleaning agent!

Clean the appliance periodically by spraying a mild alkaline agent which is save for food
through it. Rinse it thoroughly thereafter with fresh water. See instructions of manufacturer.
When spray gun is not used for a longer time, spray through resin-free oil for conservation.
If the appliance should happen to fail despite the care taken in manufacture and testing,
repair should be carried out by an authorised customer service.
or all correspondence and spare parts orders, always include the order number.

4