background image

OPERATING MANUAL FOR 

RETIGO

 HOLD-O-MAT

2

ver. EN-01/10/12

Dear customer,

Congratulations on purchasing the new Retigo Hold-o-mat. The Retigo Company appreciates your decision 

and believes that you will always achieve great results turning your ideas into reality in your everyday work by 

using this equipment. By using your new Hold-o-mat you will attain the highest quality of prepared food and your 

guests will like revisiting to your establishment.

Retigo s.r.o. believes that the new Retigo VISION  Hold-o-mat will bring you maximum comfort during everyday 

work and present new possibilities of food preparation. 

In order for you to achieve great results with your new Retigo Hold-o-mat right from the beginning, we would 

like to provide you with the help of this manual with all the necessary information and useful advice for trouble-free 

work. To be able to take full advantage of all the possibilities of your new Retigo Hold-o-mat we recommend that 

you carefully study the manual before using the equipment.

Retigo s.r.o. wishes you lots of cooking pleasure in using your new Retigo Hold-o-mat.

Summary of Contents for Hold-o-mat Big



















Reviews: