Cabinet Installation
Connections
Access to the Application
Interface
Write down the DCT200 IP address into your
Web browser (http://10.10.10.1) and press the
Enter key
DCT200 Web Interface
User name: Admin
Password: admin
(Letters are key sensivite)
Wall Mounting
01
02
03
04
05
06
07
08
09
10
11
12
13
DC power connection
1-wire digital sensor port (RJ11)
Water leak sensor port (RJ11)
Digital input connections (DI1, DI2, DI3, DI4)
Digital output connections (DO1, DO2)
Infrared transmitter / receiver port
Temperature and humidity sensor
USB 2.0 Ports
10/100 Ethernet port
Button to return to factory settings
Backup battery port
Audio output 3.5mm
HDMI port
Restore Factory Settings
Remove the DCT200 power connection
By holding down the reset button, insert the
DCT200 power cord
Wait the status light which is on the DCT200 until
it blinks 5 times
Remove DCT200 power connection again and
wait for a while then reconnect the power port
Reset your Username,
Password and IP
http://10.10.10.1
01
02
03
04
05
06
07
08
08
09
13
10
11
A
A
Screw
Screw
Rack Mount
A
Screw
Screw
Wall
Mount
Duvar
A
Hold the Reset button when the software is open.
When the status light blinks 5 times
release the reset button.
T
Retmon DCT200 default IP address is 10.10.10.1
and the subnet mask is 255.255.255.0
o access the retmon network interface from your
PC, define ’10.10.10.x/255.255.255.0