Technical Data
14
4
Technical Data
4.1 Use of the Device for the Intended Purpose
Target group
: Operators
Machine type designation
: GM 300
The GRINDOMIX GM 300 laboratory knife mill serves to mill, homogenise and mix soft to
medium-hard, aqueous, fatty, fibrous and dry materials within seconds
so that they will be suitable for analysis.
It can process sample volumes of up to 4.5 litres quickly and reproducibly.
The GRINDOMIX GM 300 is designed for quantities up to approx. 4500 ml, large volume
materials up to 1000 ml. The feed size is < 130 mm.
It is particularly engineered to cut up the following materials:
fish, meat, vegetables, cheese, fodder pellets, seeds, bacon, sausage, dry bakery products and
pasta, all products with high water, fat and fibrous content and similar materials.
The GRINDOMIX GM 300 meets the special laboratory and analysis requirements and in its
range of performance it far outstrips that of commercially available household mixers.
Our applications laboratory will be happy to give you more information.
−
Fast and gentle size reduction and homogenisation of food
−
Speed selectable from 500 - 4,000 rpm
−
Powerful 1.5 KW industrial motor
−
All parts which come in contact with the sample material are autoclaveable
−
Easy changing and cleaning of the grinding tools
−
Interval operation and reverse mode possible
−
Mode for preliminary size reduction and fine size reduction
−
Digital parameter preselection
−
10 parameter combinations can be stored
NOTICE
N1.0007
Range of application of the device
Long-term operation
−
This laboratory device is designed for eight-hour single-shift operation
with a duty cycle of 30 %.
•
This device may not be used as a production machine nor is it
intended for continuous operation.
4.2 Protective Equipment
Manual access into the GRINDOMIX GM300 grinding chamber is prevented by an
electromechanical locking device.
The device can be started only if the housing cover is closed and can be opened only if the
motor has stopped completely.
The actual speed is displayed during operation.
The safety device checks that the grinding jar and cover are in place before the grinding
process can be started.
If the speed deviates by more than 15 %, the device will switch off automatically.