Display and operation
32
6.5.3 Sequences 01 to 10
The previously set programs can be processed in turn in sequences 01 to 10.
Sequence 1
Program 1
Sequence 2
Program 1+2
Sequence 3
Program 1+2+3
Sequence 4
Program 1+2+3+4
Sequence 5
Program 1+2+3+4+5
Sequence 6
Program 1+2+3+4+5+6
Sequence 7
Program 1+2+3+4+5+6+7
Sequence 8
Program 1+2+3+4+5+6+7+8
Sequence 9
Program 1+2+3+4+5+6+7+8+9
Sequence 10
Program 1+2+3+4+5+6+7+8+9+10
6.5.4 Basic settings
You can set the following device settings in this settings menu:
– Automatic opening
– Language
– Brightness
– Date
– Time
– Acoustic warning tone
– Service
6.6 Manual Mode
6.6.1 Grinding time
The device is started with the preselected grinding time and at the last used speed. A direction
reversal with pause time is not switched on.
6.6.2 Speed
You can adjust the speed in this menu.
500 to 4000 revolutions per minute
The device is started with the preselected grinding time and at the preselected speed. A
direction reversal with pause time is not switched on.
6.6.3 Direction of rotation
• Select the direction of rotation for your materials.
– Clockwise rotation (cutting).
→
soft, aqueous, fatty and fibrous materials.
– Anti-clockwise rotation (beating).
→
hard, medium hard and dry materials.
The device is started with the preselected grinding time, speed, direction reversal and direction
of rotation. The machine rotates with the set direction of rotation in one direction and can be set
to clockwise or anti-clockwise rotation.
