Chapter 6 Setup IQBoard
6.1 Orient IQBoard
At the first time you use the IQBoard ET-D Electromagnetic interactive whiteboard,
you need to orient it, so the moving track of the electronic pen can match the cursor.
You can select 4 points, 9 points or 20 points orientation. Normally 9 points orientation
is adopted. After the whiteboard is oriented, you don’t need to re-orient at the same
environment.
To orient the whiteboard
1. Do one of the followings:
Select “Start > Programs > IQBoard ET-D & PS-D Drivers >Orient”
If your whiteboard includes hotkeys, press “
” in the hotkey bar, then the 9 points
orientation interface will appear.
The Orient Precision Selection window appears.
2. Select Orientation Points and click
“Ok”
, the orientation interface appears.
