REV Ritter L17-1808B, Assembly And Operating Instructions Manual

10

GB

SCOPE OF DELIVERY

Check the delivery for completeness and perfect condition. 

In the case of missing parts or damage:

•  do not mount the unit!

•  do not put the unit into operation!

•  make a complaint to the supplier.

The deliver consists of:

•  Product

•  Instructions

•  USB charging cable

TECHNICAL DATA

•  Output: 3.7W LED

•  Illuminant: SMD LED´s

•  Luminous flux: 400lm

•  Colour temperature: 6500K

•  Colour rendering index (Ra/CRI): ≥ 75

•  Energy efficiency class: A++

•  LED service life: 30000h

•  Beam angle: 120°

•  IP protection class: IP20

•  Protection class: III (S5)

•  Ambient temperature: -15°C – 40°C

•  Dimensions W x H x D: 60 x 240 x 38mm

•  Weight: 230g

•  Battery: 3.7V / 1800mAh / 6.6Wh / lithium ion battery

•  USB: Micro IN 5V DC / 0,8A

OPERATION

•  Charging: Before (first) use, fully charge the product until the charge indicator light is green

•  Charging time: 4 hours (depending on the selected USB power supply)

•  Running time: 1.5 hours (400lm) / 4 hours (150lm) / 7.5 hours (80lm)

•  1x press: full power (400lm)

•  2x press: lowest power (200lm)

•  3x press: light head (80lm)

•  4x press: From

CLEANING

•  Before cleaning, unplug the product from the power point or disconnect it from the mains supply!

•  Allow the luminaire to cool down sufficiently! 

•  Clean with a dry or slightly moist, clean, lint-free cloth and a mild detergent if required. Do not use cleaners that 

contain abrasives or solvents.

MAINTENANCE

•  Replace any damaged protective panels immediately (S6). 

•  Remove all dirt from the housing or protective panel immediately, as this can lead to overheating.

•  The light source of this luminaire is not replaceable; if the light source has reached the end of its service life, the 

entire luminaire must be replaced.