DIRECTIONS FOR USE
WASHING & DISINFECTION OF THE WASTE WATER TANK & PIPING S
Filling of the disinfectant tank :
Remove the waterproof white cap from the fill opening, then thanks to a shower head or the optional set of filling, fill the
disinfectant tank with water until the LED indicator ” FULL” ignites.
Cleaning and disinfection :
Bring the Litoo Shower in bed system to a shower tray then open the draining valve of the waste water tank.
Insert the suction pipe up to the bottom of the disinfectant tank then press on the On/off switch.
During around thirty seconds, the disinfectant solution circulates in all the pipes of the circuit of waste water.
A 360° rotary jet allows sprinkling the disinfectant solution on the walls of the waste water tank in order to clean and to
disinfect.
When the tank is empty, the red LED indicator ignites.
Nevertheless, wait as long as some liquid circulates in the piping.
Then switch off the pump.
13/16
Take the TecCare Control disinfectant and fill the measure until the line. Then tip out the product into the disinfectant tank.
