CLEANING / MAINTENANCE
CLEAN THE TUB & THE CONTROL PANEL
In order to clean the tub & control panel, take the magnetic key
and pass it in front of the infra-red of the control panel to deactivate it.
To reactivate the control panel, do the inverse operation.
Only use liquid products (liquid soap).
Don't use abrasive products like "scouring cream" to avoid scratches on the tub surface "Gelcoat".
Furthermore, to eliminate calcareous marks settled by water moving, we recommend to use the scaler (Gel Servex ).
Do not swill down the outside of the tub.
Do not use liquid soap and the scaler (Gel Servex) on the control panel elements;
Rada sense mixer and whirlpool control.
CLEANING OF FILTERS : HOT WATER AND COLD WATER
These 2 filters have a filtration of 300µ while the thermostatic mixer has a filter cartridge of 500µ.
Consequently, these 2 filters must be cleaned regularly (once per week).
A regular cleaning of these 2 filters is imperative in order to reduce the limestone deposits in the pipes of
the bathtub.
A bad maintenance of these filters generates times of long filling and a water with bad temperature. (water too cold)
These filters are located at the hot and cold water inlet.
1)
Stop the water feeding of the bath.
2)
Dismount the filter tank with a claw key.
3)
Take the filter out.
4)
Clean the filter (in case of calcareous deposit, use the appropriate scaler and rinse with clean water).
5)
Reassemble the parts.
CLEANING THE FILTERING CARTRIDGE OF THE MIXER (WATTS MIXER)
Dismount stage by stage elements of the thermostatic mixer starting with the brace (reference mark n°12) until the filter
cartridge (reference mark n°2).
In the event of too important limestone deposit, contact France Reval.
N° REF.
DESIGNATIONS
N° REF.
DESIGNATIONS
N° REF.
DESIGNATIONS
N° REF.
DESIGNATIONS
1
Complete body
4
Axis
7
Square tube
10
Case
2
Cartridge
5
Buffer screw
8
Rose
11
Cap
3
Buffer
6
Thread tube
9
Dial
12
Crosspiece
17/20
1
2
3
4
5
6
7
8
9
1
1
1
