CLEANING / MAINTENANCE
CLEANING OF THE FILTER OF THE FILLING SPOUT
The filling spout is equipped with an aerator with filter. The aerator can be dismantled and cleaned.
A special key delivered with the bathtub allows unscrewing easily the aerator.
It is advised to clean and to decalcify the aerator at least twice a year.
CLEANING OF THE AIR WHIRLPOOL SYSTEM
For the efficient functioning of the whirlpool system, the nozzles have to be cleaned on a regular basis (at least once a year).
Functioning of a whirlpool’s nozzle. Air is lown through the nozzle
and discharged under the chromed air jet cap.
There is a risk of heating the air jet cap is the nozzles are not regularly cleaned. Layers of soap or deposit can hinder the
circulation of the air.
To clean the nozzles, please follow the next stages :
1)
Switch off the whirlpool option and empty the bath.
2)
Use a flat screwdriver to remove the air jet cap.
3)
Clean the chromed air jet cap, the nozzle and the ball.
Then the air jet cap on the nozzle.
4)
With a soft mallet, tap the chromed air jet cap.
Check that it is correctly positioned on the nozzle.
Switch on the bath and the whirlpool system to check they are working properly
18/20
