2
A A
A A
A A
A A
CHARGING
INSTALL THE BATTERIES INTO THE CONTROLLER
1. Plug charger into computer or USB charge adapter. The LED on the
charger will turn on.
2. Make sure that the On/Off switch on the Nano Hexagon is off and
connect charger. The LED on the charger will turn off while the
battery is charging.
3. Typical charge time is 40 minutes. LED will turn on when the battery
is charged.
•
NEVER
leave the battery unattended while charging.
•
DO NOT
allow the USB port to power down while the
charger is connected to the battery.
•
ALWAYS
unplug the charger from the USB port and
the Nano Hexagon when charging is complete.
Remove the battery cover screw and the battery cover.
Install 2 AA batteries and replace the cover.
Summary of Contents for NANO Hexagon
Page 1: ......
