7
BLADE REPLACEMENT
BATTERY REPLACEMENT
Your Nano Hexagon has 3 “A” rotor blades which spin clockwise and 3 “B” rotor blades
which spin counterclockwise (when viewed from above). The arms have a letter to
identify proper rotor blade. The letter is also on the bottom of each rotor blade. If the rotor
blade and arm letters do not match, the Nano Hexagon will not be able to fly.
When the props are installed correctly, the blades on the “A” arms should have a
clockwise pitch. The “B” arms will have counterclockwise pitch.
IMPORTANT!
If the props are installed
incorrectly, the Nano Hexagon will not fly.
B
B
B
A
A
A
If the battery will not hold a charge or the flight time is much less than normal, a replacement
battery may be needed. A soldering iron will be needed to remove and install the battery.
1. Remove the 6 screws on
the bottom of the Nano
Hexagon.
2. Carefully separate two halves of the
body and remove the lower half.
3.
Carefully solder in the new battery.
Note:
The red wire is soldered next to
the B+ marking on the frame.
WARNING:
Cover any bare
battery wires with tape when they
are loose to prevent arcing and
possible damage to the battery.
Summary of Contents for NANO Hexagon
Page 1: ......
