10
B112/B110 Subwoofer
Quick Start Guide
CARINg fOR yOUR SUBwOOfER
The cabinet’s wood veneer finish does not require routine maintenance.
Cabinet surfaces that have been marked with dust, fingerprints, or other
dirt can be cleaned using a soft cloth – preferably microfiber, and high-
quality auto wax. Take care not to come in contact with the transducer.
• Use caution to avoid contacting the rubberized trim on the top of
the loudspeaker with auto wax. If necessary, the rubberized trim
can be cleaned with denatured alcohol on a microfiber cloth.
To clean the grille, gently vacuum it using a soft-bristled brush vacuum
attachment with the vacuum cleaner set to the lowest possible suction.
CAUTION: To prevent cabinet damage, do not use metal
polish or a cloth made with steel wool to clean the
cabinet. To prevent possible transducer damage, do not
apply furniture polish directly to the cabinet.
SPECIfICATIONS
B112/B110
Type:
Powered subwoofer
Low-frequency transducer:
Coated paper/pulp cone (12” – B112; 10” – B110) with 50mm two-layer copper voice coil,
vented triple-stacked ceramic 5 magnet assembly and vented die-cast aluminum frame
Amplifier power:
1,000 watts (RMS), 2,000 watts (peak)
Input sensitivity/impedance:
400mV (full power)/20k ohms (balanced); 14k ohms (unbalanced)
Crossover frequency:
50Hz – 200Hz, independent low-pass and high-pass 1st-, 2nd-, 4th-, 8th-order Butterworth,
4th- or 8th-order Linkwitz-Riley (factory-disabled, user-programmable with Revel LFO
programming software)
Enclosure type:
Sealed
Inputs:
Balanced (XLR); unbalanced (RCA)
Available finishes:
Piano black; high-gloss genuine American walnut veneer
Dimensions (H x W x D):
B112:
B110:
18-7/16" x 15-15/16" x 16-9/16" (468mm x 404mm x 420mm), with grille
16-7/8" x 14-5/16" x 13-7/16" (428mm x 364mm x 342mm), with grille
Weight:
B112:
B110:
70.4 lb (31.9kg)
56 lb (25.4kg)
