22
BLUE LED LIGHT
FAN ON/OFF
CONDENSATION SENSOR
TIMER AND SENSOR SETTINGS
Changing The Settings:
By default, the CONTROL comes with the condensation
(humidity) sensitivity set to average levels, and the MPH timer set to 0 minutes. To
change the settings, remove the TIMER AND SENSOR SETTINGS cover by taking
off the face plate and then inserting the end of the SETTINGS TOOL (or a
non-metal tool of your own) into the two holes on either side of the CONTROL. Use
the SETTINGS TOOL to turn the settings dials. The MPH timer can be set between
0‒60 minutes. The CONDENSATION SENSOR can be set at low, average, or high
sensitivity. Once you change a setting, the changes will take effect after the next
on/off cycle, so it’s recommended that you turn your fan on then off after you make
a change to the settings.
SETTINGS TOOL
use to remove cover and
adjust settings dials
Using The Control
BLUE LED LIGHT:
Lets you know when your fan is on (especially useful for fans
with low sound levels).
CONDENSATION SENSOR:
Senses condensation
(humidity) in the room and turns your fan on and off
automatically.
TIMER AND SENSOR SETTINGS:
Minutes per hour
(MPH) timer (left) and moisture sensitivity (right)
settings (hidden behind a removable cover)
FAN ON/OFF:
Turns 20-minute countdown timer on and off (can be used to
temporarily override CONDENSATION SENSOR).
