RS2 - X2 Quick Start and User Manual
1920x1080 30FPS
1280x720 30FPS (Default)
848x480 30FPS
640x480 30FPS
ON
OFF (DEFAULT)
ON (DEFAULT)
OFF
AUTO (DEFAULT)
SUNNY / CLOUDY /
FLUORESCENT/INCANDESCENT
ENGLISH (DEFAULT)
ON (DEFAULT)
OFF
SET YYYY/MM/DD HR/MIN/SEC
ON
OFF (DEFAULT)
1. RESOLUTION
2. PRE-RECORDING
Stores 30 seconds prior
to record activation.
3. AUDIO ALARMS
4. WHITE BALANCE
5. LANGUAGE
6. TIME AND DATE
STAMP
7. TIME AND DATE
SETUP
8. START IN
STEALTH MODE
Editable menu settings
12
RS2 - X2 Quick Start and User Manual
Editable menu settings
13
9. AUTO LCD OFF
10. DEFAULT SETTINGS
Resets camera to default settings.
11. UNIT ID SETUP
12. PRE-RECORD MUTE
No audio is recorded during the
pre-record section of video. Once the
user switches on record mode, audio is
then recorded.
13. PROTECTED MODE
With protected mode enabled the
camera is seen as a mass storage device
on your computer and video files can be
accessed and copied, but videos cannot
be played without DEMS or Reveal
Camera Manager.
14. TRUSTED MODE
With trusted mode enabled the camera is
seen as a removable disk on your computer,
but if you try to access the disk, windows
will report there is no disk in the drive and
no data from the camera can be accessed
without DEMS or Reveal Camera Manager.
15. RECORD OFF MODE
For single or two actions to stop
recording.
16. FIRMWARE VERSION
30 SECS / 2 MINS / 5
MINS /OFF (DEFAULT)
NO / YES
USER SET
(five alphanumerics)
ON
OFF (DEFAULT)
ON
OFF (DEFAULT)
ON
OFF (DEFAULT)
SLIDER ONLY
(DEFAULT)
SLIDER PLUS
POWER BUTTON
Displays the version
of firmware installed
on the device.
