Operation and Maintenance Manual – Steam sterilizers mod. Full Clave
Rev. 01 of 01-12-2006 - C:\Documenti\Manuali di istruzione\FULL CLAVE GB-R01.doc
Page 10 of 34
5 .
S T A R T I N G
A N D
S E T T I N G
A T
W O R K
5.1 Removing the machine from the packing
The machine is consigned packed on a wooden pallet in a cardboard box: make sure that there are no
dents and that the wrapping is in optimum conditions.
The machine must be stored in a dry place, sheltered from adverse weather conditions, at a temperature
b3°C and +35°C. The machine must be handled without jolting and using appropriate means.
Open the pack without overturning it. Remove the polystyrene from the top and sides (the weight of the
model is given in chap. 2, technical specifications).
Lift the machine out of the box in a vertical direction using the 2 hooks supplied in the bag inside the
pack. These should be inserted into the two holes at the sides of the casing (
see drawing on page 11
).
Remove the pluriball wrapping from around the machine and make sure that all parts of this latter are
undamaged and complete with all the accessories indicated on the consignment note. Immediately notify
our dealer if discrepancies are discovered.
Keep the packing materials for as long as the machine remains in use, not just for the warranty period.
This is because the autoclave may need to be calibrated or regulated by the manufacturer's staff of by an
after-sales center. Non-original packing is unable to ensure that the machine is correctly protected during
transport.
The original packing comprises the following items:
- BIWALL BOX IN CARDBOARD WITH 3 CORRUGATIONS
- PLURIBALL POLYETHYLENE BAG
- SHAPED POLYSTYRENE FOAM
- PALLET INSIDE THE BOX
DRAWING ILLUSTRATING HOW THE MACHINE MUST BE LIFTED FROM THE PACK
