Operation and Maintenance Manual – Steam sterilizers mod. Full Clave
Rev. 01 of 01-12-2006 - C:\Documenti\Manuali di istruzione\FULL CLAVE GB-R01.doc
Page 5 of 34
2 .
T E C H N I C A L
S P E C I F I C A T I O N S
FULL CLAVE
are autoclaves designed and built in compliance with the operators' need for
functionality, practical use and safety.
Are fully automatic. All functions are electronically servo-assisted, so the operator knows what the
machine is doing at any given moment.
Have functional characteristics that make them unique, i.e.:
FULL CLAVE
activates an anti-condensation function after each cycle, if the door is not opened
within 30 min.
Built-in
DRYING CYCLE
: by means of a vacuum pump.
AUTOMATIC AIR EXHAUST
to eliminate the air from inside the chamber at the beginning of
the cycle, thus achieving the utmost steam saturation.
DOUBLE SAFETY VALVE
to prevent overpressures.
SAFETY THERMOSTAT
to prevent overtemperatures.
Electronic
CHECK CONTROL
of each function with message display.
Press-moulded seamless 18/10
STAINLESS STEEL CHAMBER
.
16 or 20l. CAPACITY
chamber which can be fitted with up to five trays.
DOUBLE TANK
for the water: the
FIRST FOR FILLING
and the
SECOND FOR DRAINING
+ USED WATER CAN.
PRE-VACUUM
to –700 mBar by means of a vacuum pump.
