Operation and Maintenance Manual – Steam sterilizers mod. Full Clave
Rev. 01 of 01-12-2006 - C:\Documenti\Manuali di istruzione\FULL CLAVE GB-R01.doc
Page 9 of 34
-12- DOOR OPENING LEVER
-13- FILL TANK
-14- DRAIN TANK
-15- PRINTER
-16- BACTERIOLOGICAL FILTER
INFO DISPLAY READING:
A=Two boxes indicating the cycle number
B=Five boxes indicating the cycle temperature
C=Seven boxes indicating the name of the cycle
D=Seven boxes indicating the temperature in the chamber
E=Eight boxes indicating the pressure in the chamber
LANGUAGE, DATE AND TIME SETTINGS:
When the door is open and the machine on, press key (4) to display the machine data settings (amongst
which the date and time) in succession.
Keep buttons (3) and (4) depressed for about 10 seconds at the same time in order to edit these data.
The first setting displayed is the language selection. This can be changed by scrolling the various options
with buttons (2) and (3). Use button (10) to confirm the required language or pass on to the next setting.
(However, the printer will always print in English). The second setting concerns the presence of the
external can. This setting must never be changed and must therefore be left with the preset value 0 (zero).
The third type of variable settings are the date and time. Use the method described for language variation
to edit these data.
To ensure that the machine operates correctly, make sure that the value referring to
the presence of the external can is never changed. Once this setting has been accessed,
it must be confirmed with key (10) without having been changed. Always maintain 0
(zero) value in this field.
