Page 4 of 12
RO-300G & RO-600G
W A T E R P U R I F I C A T I O N S Y S T E M
System Specifications
RO-300G
RO-600G
III. RO-300G & RO-600G SYSTEM SPECIFICATIONS:
WARNING! DO NOT USE WHERE THE WATER IS MICROBIOLOGICALLY UNSAFE OR OF UNKNOWN QUALITY WITHOUT
ADEQUATE DISINFECTION BEFORE OR AFTER THE SYSTEM.
PRETREATMENT MUST BE SUFFICIENT TO ELIMINATE CHEMICALS, ORGANICS OR INOR-GANICS THAT COULD ATTACK THE
MEMBRANE MATERIAL ALWAYS TURN OFF THE UNIT, SHUT OFF THE FEED WATER, AND DISCONNECT THE ELECTRICAL
POWER BEFORE WORKING ON THE UNIT.
NEVER ALLOW THE PUMP TO RUN DRY.
NEVER ALLOW THE UNIT TO FREEZE OR OPERATE WITH A FEED WATER TEMPERATURE ABOVE 100°F.
WARNING! WARRANTY IS VOID AND COMPANY ASSUMES NO RESPONSIBILITY FOR SYSTEM OR PROPERTY DAMAGE IF
THE SUPPLY PRESSURE IS OVER 80 PSI.
17.5 in (444.5 mm)
10.5 in
(266.7 mm)
32 in
(812.8 mm)
17.5 in (444.5 mm)
10.5 in
(266.7 mm)
32 in
(812.8 mm)
RO-300G-600G_manual.indd 4
6/28/16 3:57 PM
