2
R-SR-1309 & R-SR-1310
10-04-2017
Installation
2-4
2.2
Installation
This section describes how the shower cubicle is to be installed.
2.2.1 Connection information
To install the shower cubicle, the following facilities are required on location.
Voltage
230 V 16 A
Water discharge
Minimum
32-40 mm
Water supply (cold and hot)
Minimum
15 mm (=½”)
The figure below represents a dimensioned sketch, describing the required locations of these facilities.
The dimensioned sketch indicates the
position of the siphon. Make sure the discharge is
at least 15 cm removed from the centre of the siphon.
The water and power connections may be
either on the left-side or on the right-side wall.
