2
R-SR-1309 & R-SR-1310
10-04-2017
Installation
2-12
6.
Mount
the sealing strips onto the glass shower panels and doors.
–
Push
the sealing strips onto the edges of the
fixed glass panels and the glass shower door (see Drawing 6-1).
Note: make sure the flaps of the
sealing strips point to the glass opposite.
–
Seal
the shower cubicle thoroughly using acid-free
sealant and
allow
the sealant to thoroughly dry (see Drawing 6-2).
Do not seal the water-return grooves of the shower basin.
Only make use of acid-free sealant. Allow the sealant to dry
for 24 hours before using the shower cubicle for the first time.
Drawing 6-2
Drawing 6-1
