2
R-SR-1309 & R-SR-1310
10-04-2017
Installation
2-14
9.
Prepare
the electricity and water supplies.
–
Place
the hand shower onto the holder (see Drawing 9-1).
–
Connect
the hand shower to the
connection on the rear panel (see Drawing 9-2).
–
Connect
the hose for the water supply to the connector; and subsequently
connect
the hose to the connection of the overhead shower (see Drawings 9-2 and 9-3).
Place a rubber sealing ring in the couplings.
Drawing 9-1
Drawing 9-2
Drawing 9-3
Silicone
sealing ring
Silicone
sealing ring
Silicone
sealing ring
Silicone
sealing ring