OPERATING INSTRUCTIONS
This appliance is intended for household use only.
The appearance of this appliance may differ from the illustration.
Only use this appliance for its intended purpose as described in this manual.
Do not use attachments not recommended by the manufacturer.
HOW TO USE
1.
Place the appliance on a flat, level, solid floor. Unfold the foot spa by pulling up the
edge one side at a time while holding the base firmly (figures 1 - 3).
2.
Use the anti-collapse system to lock the unit. To do this, pull out the metal props at
the front and back of the foot spa and push them into place under the edge of the
tub (figures 4 & 5).
3.
Ensure that the unit is unplugged before filling with water. Fill with warm tap water
to the MAX fill line located on the inside of the tank.
4.
Connect the appliance to the mains.
5.
Sit in a comfortable position and then place your feet in the foot spa. Always place
your feet in the foot spa or remove them from the spa while in a sitting position.
Never use the appliance in a standing position or stand up in the unit, as too much
pressure will cause the unit to crack.
6.
To operate the unit, select the desired water temperature by turning the ON/OFF
switch to position 1, 2 or 3 (Low, Medium, High).
NOTE:
The temperature of the water can reach up to 42°C within 15 minutes if the temperature
of the warm water initially added was at 37°C.
To reach a warm temperature quicker, we suggest using warmer tap water.
NOTE:
This foot spa cannot be used without water. It is NOT intended for dry operation.
7.
The bubble jet strips will begin to emit bubbles. Enjoy a deep massage by sliding
feet back and forth over the stimulating acunode mat on the footspa floor.
8.
If desired, add some drops of essential oil in the essential oil therapy case
positioned on the side of the foospa for a true beauty salon experience.
ALWAYS
use the Essential Oil Therapy Case.
NEVER
add essential oils or other aroma pads
directly into the water as this can result in degradation to the special foldable material.
Ten minutes daily is sufficient to feel refreshed. The length of the massage and the frequency of
use can be increased if necessary.
AFTER USE
1.
When you have finished, turn the appliance OFF by turning the ON/OFF switch to
position 0, and remove the plug from the mains.
2.
Hold the appliance on the sides of the unit and pour the water out.
NOTE:
The footbath should be emptied through the convenient pouring mouth at the front of
the unit.
3.
To store the foot spa, unlock the anti-collapse system by unclipping the metal
props from under the edge of the tub and folding them away. Then fold the foot
spa down by pressing down on the edges while holding the base firmly.
CLEANING -
Rinse the unit with water and a mild cleaning liquid and dry.
Wipe with a soft, damp cloth.
DO NOT
use an abrasive cleaner. Keep away from all solvents and any harsh detergents.
DO NOT
immerse the appliance in water.
STORAGE -
Always unplug when not in use.
Allow the appliance to cool before storing. Always store in a dry location. Do not pull
or twist the cord. Do not wrap the cord around the appliance, as this may cause the cord to
wear prematurely and break. Regularly check the power cord for wear and damage (particularly
where it enters the appliance and the plug).
FEATURES
A. SPLASH GUARD
B. SOFT ACUNODE MAT
C. BUBBLING STRIPS
D. MAX FILL LINE
E. SWITCH ON AND TEMPERATURE SETTINGS BUTTON
F. ESSENTIAL OIL THERAPY CASE
G. EASY POURING MOUTH
A
G
C
B
E
F
D
1.
E
G
F
2.
3.
4.
5.
