MOTION SETUP
SENSITIVITY : 12
POSITION : ALL
DELAY : 00SEC
OUTPUT : OFF
HOLD TIME : 03SEC
EXIT(ESC TO EXIT)
SENSITIVITY
: 1-15
POSITION
: ALL,CENTER(the center box displays): motion detection area.
DELAY
: 00-05SEC : The delay time is used to make adjustments for scenes that
have sudden changes such as lights and shadows created by headlights
of nearby traffic. The motion action occurs only when the motion keeps
continuously during the delay time,
OUTPUT
: OFF,OUT1,OUT2,OUT3,OUT4: relay output
HOLD TIME
: 03-99SEC:
The hold time starts to count after the motion detects.
When a motion occurs, the dome activates the relay output, displays the message of
“MOTION” on the screen, and sends the command of “ALARM 8” to the keyboard.
3.19 Motion Setup type 2 (22x model only)
The motion detection function is available in the preset mode only. After you set the motion in
any preset, when you call the preset with the motion, the motion detection operates.
In the preset setup, you can set the motion setup as below.
PRESET SETUP
NUMBER : 001
TITLE : ---
CAMERA SET
DWELL : --- SEC
12345678901234567890
00
█
**-----------------
02 --------------------
04 --------------------
06 --------------------
NEXT PAGE
SAVE AND EXIT(ESC TO CANCEL)
MOTION SETUP
AE SETUP
SAVE AND EXIT(ESC TO EXIT)
MOTION :OFF
FOCUS : AUTO
PRESET CAMERA SETUP
To enable the motion on the preset, set MOTION to
ON
.
To enter the motion setup, push the joystick to right on the motion setup.
46
