5
EN
Problem
Possible Cause
Solution
Quad drifts or changes
altitude on its own
Sensor is out of calibration
Turn the power
OFF
then back
ON
for
the transmitter
Quad fl ips over upon takeoff
Propellers are not installed
correctly
Check propeller direction and condition
Double Rates
The quadcopter has 2 operation modes: beginner and advanced:
Press the
RATE
button to enter the setting mode.
• The transmitter beeps once, indicating beginner mode (sensitivity 30%).
• The transmitter beeps three times, indicating advanced mode (sensitivity 70%).
Higher sensitivity means a faster quadcopter! Lower sensitivity means a slower
quadcopter.
Trimming
Troubleshooting Guide
Drift Forward
Trim Backward
Drift Backward
Trim Forward
Drift Right
Trim Left
Drift Left
Trim Right